The ArmorCore® batten strips can be attached directly to the panels and should be used where any vertical or horizontal  joints occur. Battens are not required where a 90 corner occurs, in which case a panel should simply overlap to the next panel at the corner. For typical wall and millwork installations, a 4” wide batten strip of the same level material should be specified at the butt-joints to provide a minimal 2”overlap from one panel to the next, or each side of the joint.

Level 2 Bullet Resistant Performance Level

• UL752 Standard for Bullet Resisting Equipment – Level 2 Paragraph 4.4
• One Hour Fire Rating Per ASTM E119-98

Ammunition Tested

• 158 grain (10.2g) .357 Magnum jacketed soft point, minimum velocity of 1250 fps (381 mps)